Showing posts with label DIY. Show all posts
Showing posts with label DIY. Show all posts

Thursday, November 29, 2012

How to Save Money with Foam Shutters


Tips on How to use Foam Shutters to Save Money:
  • Use on all windows except southern windows at any time when a heat source is required.
  • Put shutters on south facing windows when the sun goes down when a heat source is required.
  • As a general winter rule, windows are best left exposed only when standing in front of the uncovered sunny window causes your skin to feel warm, or makes the floor warm. The rest of the time, the window is usually leaking more heat than creating it. The opposite is true in summer.
  • Heat from interior lightbulbs will help to heat your house while producing light, so losing heat to gain light from windows is not the best use of energy. It takes far more energy to heat a home than illuminate it.
  • Store shutters in a location where they are easily accessed, but unlikely to be damaged, as they will be installed and removed often.
  • Please note that foam boards, like curtains, are flammable.
  • Consider shutters for southern windows in the daytime and western windows after noon during days when artificial cooling is required.
  • On days over 100 degrees, shutters are recommended for all windows. Make sure to use low wattage LED bulbs in the house when artificial cooling is required.
Foam Shutter Craft DIY link here.

Wednesday, November 28, 2012

Foam Board Window Insulation


Windows, regardless their independent insulating qualities, are never very good. Even with the best residential gas-filled, double glazed windows you can buy, you can get an R-value of maybe 3 or 4. Add 1 if you use insulated curtains. Blue or pink extruded polystyrene (XPS) foam board has an R-Value of roughly 5 per inch, if I remember correctly. By cutting foam board to fit in your windows, you can increase your window insulation by however thick you make your foam.

Foam Insulation Shutters:

Replacing the Headliner on a Ford Explorer

I found this link a day too late:

http://www.wlsheadliners.com/tutorials/ford-explorer-headliner/

But it's a great tutorial. Wish I found it sooner. But just in case this site ever goes down, I'm going to tell you how to remove the headliner from a 1994 XLT Ford Explorer. I imagine that it's applicable for a lot of Explorers, and probably some other SUV's.